BWB3020-D1
BWB3025-FL
BWB3020-FL
Each unit comes equipped with an interior locker to accommodate deposits,
a large interior for storage of cash trays, and a door-mounted, recessed
coin rack. |
Extensive research and development went into the
engineering of AMSEC’s Wide Body, “B” Rate cash handling
depository safes. Designed to offer complete cash management versatility
with a wide
selection of depository options such as a top, front or rear load depository,
one to three deposit slots or a pull- out deposit drawer. |
BWB Standard Body Features:
- Door: Massive 1/2" thick A36 solid steel plate.
- Formed high tensile steel body and jamb construction to maximize
protection against pry attack.
- Reinforced internal jambs on all four sides to provide protection
against sledgehammer attack.
- U.L. listed Group II, key changeable combination lock.
- 3-way locking mechanism consisting of five 1" diameter chromed
steel locking bolts.
- Bolt detent system engages boltwork automatically.
- Locks and relocks protected by a large carburized hardplate.
- Auxiliary spring-loaded relocking devices.
- Convenient, door-mounted, recessed coin rack.
Interior Locker Features:
- Heavy 1/4" steel door, with Medeco® high security camlock.
- Large clear door opening: 6"H x 12"W.
- Inside Dimensions:
20" Depth:
ID, 6-1/8" x 19-3/4" x 13-1/2"
Cu. In=1633
25" Depth:
ID, 6-1/8" x 24-3/4" x
18-1/2"
Cu. In.=2804
- Note: Front Load Depository - inside locker height
restricted to 6".
|
Deposit Drawer Features:
- Large “fish” resistant, pull out drop
drawer deposits directly into standard interior locker. Drawer size:
1-1/8 x 3-1/2 x 7-1/2
- Heavy duty steel sliding drawer.
- Only available in the BWB3020D1 model.
Front Load Depository Features:
- Recessed heavy duty 1/8" construction with 1/8" door.
- Protected by dual “anti-fish baffles.”
- Large package capacity: 4" x 9" x 11-1/2" (maximum).
- May be ordered in any one of four directions. Specify front, reversed,
right load or left load.
IMPORTANT: AMSEC Depository safes are recommended for any operation that
requires a non-returnable deposit such as armored car companies, convenience
stores, restaurants, etc. The top locker is not meant for overnight storage
of cash or valuables. |
Model
No. |
Inside
H x W x D |
Outside
H x W x D |
Door
Opening |
Cubic Inch
Capacity |
Wt.
Lbs |
Interior
Shelves |
| BWB2020 |
19-3/4 x 19-3/4 x 17 |
20 x 20 x 20 |
14-3/4 x 16-1/4 |
6,631 |
170 |
1 |
| BWB3020 |
29-3/4 x 19-3/4 x 17 |
30 x 20 x 20 |
24-3/4 x 16-1/4 |
9,988 |
270 |
2 |
| BWB2025 |
19-3/4 x 24-3/4 x 22 |
20 x 25 x 25 |
14-3/4 x 21-1/4 |
12,500 |
250 |
1 |
| BWB3025 |
29-3/4 x 24-3/4 x 22 |
30 x 25 x 25 |
24-3/4 x 21-1/4 |
16,198 |
290 |
2 |
| BWB4020 |
39-3/4 x 19-3/4 x 17 |
40 x 20 x 20 |
34-3/4 x 16-1/4 |
13,346 |
340 |
3 |
| BWB4025 |
39-3/4 x 24-3/4 x 22 |
40 x 25 x 25 |
34-3/4 x 21-1/4 |
21,644 |
390 |
3 |
Specify: D1=Drawer (BWB3020D1 only).
Specify: FL=Front Load Depository.
Specify: FLR=Reverse Facing Hopper
† Add 9-3/4" to height for Front Load Depository.
Minus 10-3/4" H for clear I.D. with locker.
(Add 50 lbs. for Front Load Depository.) |
